Service Hotline
+86-595-22418895
Products

Product Categories

Tough Manual Call Point For Wireless Fire Alarm System

Tough Manual Call Point For Wireless Fire Alarm System

This apparatus should be installed by the guidance of a competent person. After hearing the fire alarm, you should call for help and make evacuation on time from the fire prevention channel. If you can, please alarm asap.

Products Details

Installation details:

The manual call point can be mounted on the wall. There are 4 screw holes on the base. Diameter of the hole is 5mm. After mounted the base on the wall, connect the MCP to fire panel. Then press the remainder parts to the base. The cable for connecting to fire panel, 0.5mm2-1.5mm2 is recommended.

INSTALLATION.png


Indication:

There are 2 LEDs(green and red) at the top right corner of the MCP.

Normal operation: The green LED blinks about 1 time per second at 24VDC

Alarm: The red LED lights and green LED extinguished.

Reset:

At the left bottom corner, there is a L-shaped hole for reset. Push the key in, and then pull out, the reset is complete.

Manufacturer: 

QUANZHOU KARASSN INTELLIGENT TECHNOLOGY CO LTD

Working   Voltage:  

24VDC

Work   Current:

Alarm   Current:

≤40uA   @24VDC

≤50mA   @24VDC

Contact   Resistance:

≤0.02 ohm

Working   Conditions:

Temp.   –10~+65;

Humidity:10%-90%   RH

Service   life:

10   years






Hot Tags: tough manual call point for wireless fire alarm system, China, manufacturers, suppliers, factory, companies, wholesale, buy, cheap
Feedback
Feedback
Send
Contact Us
Address: Karassn Co., Chongwen Road 5th, Economic & Technologic Zone, Quanzhou, Fujian, China
Tel: +86-595-22418895
Fax:
E-mail: export_4@karassn.com